Find a Service Center
Boston Gear
F7715-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805903
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output Torque @ RPM | 380 in lb @ 1150 rpm, 441 in lb @ 1750 rpm |
| Motor Frame Size | B556C |
| Output (Shaft or Bore) Size | 3/4 in |
| Media Mapping Style | F |
| Input (Shaft or Bore) Size | 5/8 in |
| Bore Code | B5 |
| Box Height | 5 3/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Material | Cast Iron, Standard Paint |
| Base Mounting Attachment | No Base |
| Ratio | 40:1 |
| Input Configuration | C-Face Quilled |
| Center Distance | 1.54 in |
| Output Shaft | Solid |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Series | 700 |
| Motor HP | 0.3333 hp |
| Base to Centerline of Output Shaft | 1.91 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output Configuration | Left Output |
| Center Distance Code | 715 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Length | 5 1/8 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.3333333 hp @ 1800 rpm |
| Lubrication | None |
| Use With | 715 |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Worm Position | Universal |
| Standard | AGMA Service Class II |
| Torque Out @ 1150 rpm | 380 in lb |
| Style | Right Angle |
| Base | No |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Shaft Assembly Code | G |
| Housing Material | Cast Iron |
| Output Torque | 442 lb-in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Media Mapping Output | G |
| Input Power Rating | 0.43 hp, 0.321 kW |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Output RPM @ 1750 rpm Input | 43.75 rpm |
| Input Motor HP | 0.33 |
| Frame Size | 56C |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Box Width | 5 1/16 in |
| Washdown Duty | No |
| Max. Input HP @ 100 rpm | 0.036 hp |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Fan Cooled | No |
| Family Name | F |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Torque Out @ 1750 rpm | 441 in lb |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Left Output |
| Output Speed | 43.8 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Input HP @ RPM | 0.24 hp @ 1150 rpm, 0.43 hp @ 1750 rpm |
| Frame | 56C |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Rated Efficiency | 71% |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Reduction Type | Single |
| Weight | 17.1 LB |
| EAN or UPC | 781711519158 |
