Find a Service Center
Boston Gear
F7715-5-B7-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807799
- 1.50 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Lubrication | None |
| Box Height | 5 3/8 in |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Frame Size | 140TC, 180C |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Family Name | F |
| Media Mapping Output | G |
| Torque Out @ 1750 rpm | 291 in lb |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Shaft Assembly Code | G |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Reduction Type | Single |
| Washdown Duty | No |
| Center Distance | 1.54 in |
| Motor Application | General Purpose |
| Input (Shaft or Bore) Size | 7/8 in |
| Media Mapping Style | F |
| Rated Efficiency | 94% |
| Base to Centerline of Output Shaft | 1.91 in |
| Box Length | 5 1/8 in |
| Input Motor HP | 1.50 |
| Worm Position | Universal |
| Center Distance Code | 715 |
| Series | 700 |
| Fan Cooled | No |
| Motor Frame Size | B7140TC180C |
| Output Configuration | Left Output |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Keyway Size | 3/16 x 3/32 |
| Output Speed | 350 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Base Mounting Attachment | No Base |
| Output Torque @ RPM | 285 in lb @ 1150 rpm, 291 in lb @ 1750 rpm |
| Bore Code | B7 |
| Output Shaft Projection | Solid Left Output |
| Use With | 715 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Output Shaft | Solid |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Input Configuration | C-Face Quilled |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Input HP @ RPM | 1.15 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Ratio | 5:1 |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output Bore Shaft Dia. | 0.75 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Torque | 291 lb-in |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Style | Right Angle |
| Housing Material | Cast Iron |
| Frame | 140TC, 180C |
| Standard | AGMA Service Class I |
| Motor HP | 1 1/2 hp |
| Box Width | 5 1/16 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Torque Out @ 1150 rpm | 285 in lb |
| Material | Cast Iron, Standard Paint |
| Base | No |
| Output (Shaft or Bore) Size | 3/4 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711518977 |
