Find a Service Center
Boston Gear
F7715-5-B7-G
700 Series 5:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807799
- 1.50 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Housing Material | Cast Iron |
| Shaft Assembly Code | G |
| Ratio | 5:1 |
| Center Distance Code | 715 |
| Box Width | 5 1/16 in |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Box Height | 5 3/8 in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Reduction Type | Single |
| Bore Code | B7 |
| Washdown Duty | No |
| Worm Position | Universal |
| Output Torque | 291 lb-in |
| Rated Efficiency | 94% |
| Input (Shaft or Bore) Size | 7/8 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Motor Application | General Purpose |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Style | Right Angle |
| Motor HP | 1 1/2 hp |
| Use With | 715 |
| Lubrication | None |
| Fan Cooled | No |
| Family Name | F |
| Output Shaft Projection | Solid Left Output |
| Output Bore Shaft Dia. | 0.75 in |
| Output Shaft | Solid |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Configuration | Left Output |
| Base | No |
| Torque Out @ 1150 rpm | 285 in lb |
| Box Length | 5 1/8 in |
| Frame | 140TC, 180C |
| Keyway Size | 3/16 x 3/32 |
| Input HP @ RPM | 1.15 hp @ 1150 rpm, 1.72 hp @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Torque Out @ 1750 rpm | 291 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Output Torque @ RPM | 285 in lb @ 1150 rpm, 291 in lb @ 1750 rpm |
| Media Mapping Style | F |
| Motor Frame Size | B7140TC180C |
| Media Mapping Output | G |
| Input Motor HP | 1.50 |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Center Distance | 1.54 in |
| Material | Cast Iron, Standard Paint |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Standard | AGMA Service Class I |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Frame Size | 140TC, 180C |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Input Power Rating | 1.72 hp, 1.283 kW |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Series | 700 |
| Output (Shaft or Bore) Size | 3/4 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output Speed | 350 rpm |
| Weight | 17.1 LB |
| EAN or UPC | 781711518977 |
