Boston Gear
F7718-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809377
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Ratio | 10:1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Fan Cooled | No |
| Output Torque | 536 lb-in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output Torque @ RPM | 536 in lb @ 1750 rpm, 480 in lb @ 1150 rpm |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Motor HP | 1 hp |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Frame Size | 56C |
| Rated Efficiency | 92% |
| Input Configuration | C-Face Quilled |
| Style | Right Angle |
| Reduction Type | Single |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Motor Application | General Purpose |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Output Configuration | Left Output |
| Series | 700 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Center Distance Code | 718 |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Bore Code | B5 |
| Output Shaft | Solid |
| Output Speed | 175 rpm |
| Lubrication | None |
| Output Shaft Projection | Solid Left Output |
| Housing Material | Cast Iron |
| Torque Out @ 1150 rpm | 480 in lb |
| Frame | 56C |
| Family Name | F |
| Input HP @ RPM | 1.61 hp @ 1750 rpm, 0.98 hp @ 1150 rpm |
| Box Width | 5 1/32 in |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Worm Position | Universal |
| Box Height | 5 3/4 in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Use With | 718 |
| Shaft Assembly Code | G |
| Media Mapping Style | F |
| Center Distance | 1.75 in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Torque Out @ 1750 rpm | 536 in lb |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Base Mounting Attachment | No Base |
| Standard | AGMA Service Class I |
| Washdown Duty | No |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Output (Shaft or Bore) Size | 7/8 in |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Input Motor HP | 1.50 |
| Motor Frame Size | B556C |
| Box Length | 5 1/2 in |
| Base | No |
| Material | Cast Iron, Standard Paint |
| Output Bore Shaft Dia. | 0.875 in |
| Media Mapping Output | G |
| Weight | 19.1 LB |
| EAN or UPC | 781711519271 |
| NSN Number | 6105-01-361-5406 |
