Boston Gear
F7718-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809377
- 1.50 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Worm Position | Universal |
| Output Shaft | Solid |
| Series | 700 |
| Output (Shaft or Bore) Size | 7/8 in |
| Washdown Duty | No |
| Input Motor HP | 1.50 |
| Motor Application | General Purpose |
| Input Configuration | C-Face Quilled |
| Box Height | 5 3/4 in |
| Frame | 56C |
| Output Torque | 536 lb-in |
| Motor Frame Size | B556C |
| Input Power Rating | 1.61 hp, 1.201 kW |
| Box Length | 5 1/2 in |
| Rated Efficiency | 92% |
| Torque Out @ 1750 rpm | 536 in lb |
| Frame Size | 56C |
| Use With | 718 |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Fan Cooled | No |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Torque @ RPM | 536 in lb @ 1750 rpm, 480 in lb @ 1150 rpm |
| Center Distance Code | 718 |
| Housing Material | Cast Iron |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Standard | AGMA Service Class I |
| Center Distance | 1.75 in |
| Output Shaft Projection | Solid Left Output |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Input HP @ RPM | 1.61 hp @ 1750 rpm, 0.98 hp @ 1150 rpm |
| Media Mapping Style | F |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Torque Out @ 1150 rpm | 480 in lb |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Output Configuration | Left Output |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Style | Right Angle |
| Family Name | F |
| Box Width | 5 1/32 in |
| Shaft Assembly Code | G |
| Bore Code | B5 |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Motor HP | 1 hp |
| Lubrication | None |
| Base | No |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Reduction Type | Single |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Output Speed | 175 rpm |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Output Bore Shaft Dia. | 0.875 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Ratio | 10:1 |
| Media Mapping Output | G |
| Weight | 19.1 LB |
| EAN or UPC | 781711519271 |
| NSN Number | 6105-01-361-5406 |
