Find a Service Center
Boston Gear
F7724-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807809
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Material | Cast Iron, Standard Paint |
| Motor Application | General Purpose |
| Frame Size | 56C |
| Rated Efficiency | 83% |
| Output Shaft | Solid |
| Reduction Type | Single |
| Use With | 724 |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Family Name | F |
| Frame | 56C |
| Housing Material | Cast Iron |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Box Height | 6 15/16 in |
| Washdown Duty | No |
| HP @ RPM | 1 hp @ 1800 rpm |
| Style | Right Angle |
| Standard | AGMA Service Class II |
| Box Width | 5 7/16 in |
| Worm Position | Universal |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Output Speed | 58.3 rpm |
| Motor Frame Size | B556C |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Media Mapping Style | F |
| Shaft Assembly Code | G |
| Input Motor HP | 1 |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Lubrication | None |
| Output Torque @ RPM | 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm |
| Series | 700 |
| Output Bore Shaft Dia. | 1.125 in |
| Torque Out @ 1150 rpm | 1170 in lb |
| Output Configuration | Left Output |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Torque | 1200 lb-in |
| Box Length | 6 3/8 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Bore Code | B5 |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Center Distance Code | 724 |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Motor HP | 1 hp |
| Ratio | 30:1 |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Fan Cooled | No |
| Media Mapping Output | G |
| Torque Out @ 1750 rpm | 1200 in lb |
| Center Distance | 2.375 in |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Base Mounting Attachment | No Base |
| Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
| Output Shaft Projection | Solid Left Output |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Center | 5 in x 2 7/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711520024 |
