Find a Service Center
Boston Gear
F7724-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101807809
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Housing Material | Cast Iron |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Series | 700 |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Lubrication | None |
| Family Name | F |
| Bore Code | B5 |
| Box Width | 5 7/16 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Output Torque | 1200 lb-in |
| Worm Position | Universal |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Style | Right Angle |
| Rated Efficiency | 83% |
| Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
| Bolt Center | 5 in x 2 7/8 in |
| Output Speed | 58.3 rpm |
| Output Torque @ RPM | 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm |
| Reduction Type | Single |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Standard | AGMA Service Class II |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Fan Cooled | No |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Motor HP | 1 |
| Media Mapping Output | G |
| Torque Out @ 1750 rpm | 1200 in lb |
| Input (Shaft or Bore) Size | 5/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Ratio | 30:1 |
| Torque Out @ 1150 rpm | 1170 in lb |
| Media Mapping Style | F |
| Base Mounting Attachment | No Base |
| Use With | 724 |
| Output Shaft | Solid |
| Center Distance Code | 724 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Shaft Assembly Code | G |
| Output Bore Shaft Dia. | 1.125 in |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Box Height | 6 15/16 in |
| Motor HP | 1 hp |
| Output Configuration | Left Output |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Box Length | 6 3/8 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Motor Frame Size | B556C |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Frame Size | 56C |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Material | Cast Iron, Standard Paint |
| Center Distance | 2.375 in |
| Frame | 56C |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Washdown Duty | No |
| Motor Application | General Purpose |
| Weight | 30.1 LB |
| EAN or UPC | 781711520024 |
