Find a Service Center
Boston Gear
F7726-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833609
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Standard | AGMA Service Class II |
| Worm Position | Universal |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Ratio | 10:1 |
| Box Length | 7 3/8 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Media Mapping Output | G |
| Base Mounting Attachment | No Base |
| Motor HP | 2 hp |
| Output Configuration | Left Output |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Media Mapping Style | F |
| Frame Size | 140TC, 180C |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Max. Input HP @ 100 rpm | 0.37 hp |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Material | Cast Iron, Standard Paint |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Center Distance | 2.625 in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Style | Right Angle |
| Input Power Rating | 3.94 hp, 2.938 kW |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Use With | 726 |
| Lubrication | None |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Output Shaft | Solid |
| Fan Cooled | No |
| Output Shaft Projection | Solid Left Output |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Torque @ RPM | 1345 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Output Speed | 175 rpm |
| Family Name | F |
| Series | 700 |
| Torque Out @ 1150 rpm | 1390 in lb |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Center Distance Code | 726 |
| Housing Material | Cast Iron |
| Reduction Type | Single |
| Motor Application | General Purpose |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Torque Out @ 1750 rpm | 1345 in lb |
| Input (Shaft or Bore) Size | 7/8 in |
| Frame | 140TC, 180C |
| Input Motor HP | 3 |
| Input HP @ RPM | 2.82 hp @ 1150 rpm, 3.94 hp @ 1750 rpm |
| Motor Frame Size | B7140TC180C |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Box Height | 8 in |
| Box Width | 5.9 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Rated Efficiency | 95% |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Bore Code | B7 |
| Output Bore Shaft Dia. | 1.125 in |
| HP @ RPM | 3 hp @ 1800 rpm |
| Output Torque | 1345 lb-in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520178 |
