Find a Service Center
Boston Gear
F7726-10-B7-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833609
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Configuration | C-Face Quilled |
| Ratio | 10:1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Media Mapping Style | F |
| Material | Cast Iron, Standard Paint |
| Style | Right Angle |
| Box Height | 8 in |
| Torque Out @ 1750 rpm | 1345 in lb |
| Input (Shaft or Bore) Size | 7/8 in |
| Input HP @ RPM | 2.82 hp @ 1150 rpm, 3.94 hp @ 1750 rpm |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Input Power Rating | 3.94 hp, 2.938 kW |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Family Name | F |
| Output Shaft | Solid |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Center Distance | 2.625 in |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output Torque | 1345 lb-in |
| Series | 700 |
| Frame | 140TC, 180C |
| Lubrication | None |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Rated Efficiency | 95% |
| Motor Application | General Purpose |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Box Length | 7 3/8 in |
| Media Mapping Output | G |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Box Width | 5.9 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Output Speed | 175 rpm |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Bore Shaft Dia. | 1.125 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| HP @ RPM | 3 hp @ 1800 rpm |
| Worm Position | Universal |
| Output Configuration | Left Output |
| Reduction Type | Single |
| Base Mounting Attachment | No Base |
| Max. Input HP @ 100 rpm | 0.37 hp |
| Shaft Assembly Code | G |
| Motor Frame Size | B7140TC180C |
| Center Distance Code | 726 |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Frame Size | 140TC, 180C |
| Use With | 726 |
| Fan Cooled | No |
| Output Shaft Projection | Solid Left Output |
| Motor HP | 2 hp |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Input Motor HP | 3 |
| Standard | AGMA Service Class II |
| Torque Out @ 1150 rpm | 1390 in lb |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Output Torque @ RPM | 1345 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Housing Material | Cast Iron |
| Washdown Duty | No |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Bore Code | B7 |
| Weight | 41.1 LB |
| EAN or UPC | 781711520178 |
