Boston Gear
F7726-25-B7-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835994
- 2 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Washdown Duty | No |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor HP | 1.5 hp |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Media Mapping Output | G |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Bore Code | B7 |
| Output Shaft | Solid |
| Lubrication | None |
| Frame | 140TC, 180C |
| Center Distance | 2.625 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Worm Position | Universal |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Box Height | 8 in |
| Media Mapping Style | F |
| Input HP @ RPM | 1.31 hp @ 1150 rpm, 1.94 hp @ 1750 rpm |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Keyway Size | 3/16 x 3/32 |
| Box Length | 7 3/8 in |
| Rated Efficiency | 87% |
| Input (Shaft or Bore) Size | 7/8 in |
| Fan Cooled | No |
| Box Width | 5.9 in |
| Base Mounting Attachment | No Base |
| Reduction Type | Single |
| Input Power Rating | 1.94 hp, 1.447 kW |
| Center Distance Code | 726 |
| Shaft Assembly Code | G |
| Output Speed | 70 rpm |
| Input Motor HP | 2 |
| Output Torque @ RPM | 1514 in lb @ 1750 rpm, 1525 in lb @ 1150 rpm |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Use With | 726 |
| Series | 700 |
| Max. Input HP @ 100 rpm | 0.18 hp |
| Motor Application | General Purpose |
| Family Name | F |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Ratio | 25:1 |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Input Configuration | C-Face Quilled |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Torque Out @ 1750 rpm | 1514 in lb |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Frame Size | 140TC, 180C |
| Torque Out @ 1150 rpm | 1525 in lb |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Left Output |
| Output Bore Shaft Dia. | 1.125 in |
| Housing Material | Cast Iron |
| Style | Right Angle |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Output Configuration | Left Output |
| Output Torque | 1514 lb-in |
| Motor Frame Size | B7140TC180C |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520352 |
