Find a Service Center
Boston Gear
F7726-25-B7-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835994
- 2 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Series | 700 |
| Housing Material | Cast Iron |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Material | Cast Iron, Standard Paint |
| Rated Efficiency | 87% |
| Shaft Assembly Code | G |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Speed | 70 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Box Height | 8 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Frame | 140TC, 180C |
| Box Width | 5.9 in |
| Standard | AGMA Service Class I |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Frame Size | 140TC, 180C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Lubrication | None |
| Torque Out @ 1150 rpm | 1525 in lb |
| Output Torque | 1514 lb-in |
| Use With | 726 |
| Center Distance | 2.625 in |
| Input Motor HP | 2 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Ratio | 25:1 |
| Input Configuration | C-Face Quilled |
| Motor HP | 1.5 hp |
| Input (Shaft or Bore) Size | 7/8 in |
| Media Mapping Output | G |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Box Length | 7 3/8 in |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Output Shaft | Solid |
| Motor Frame Size | B7140TC180C |
| Bore Code | B7 |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output Bore Shaft Dia. | 1.125 in |
| Reduction Type | Single |
| Output Torque @ RPM | 1514 in lb @ 1750 rpm, 1525 in lb @ 1150 rpm |
| Keyway Size | 3/16 x 3/32 |
| Input HP @ RPM | 1.31 hp @ 1150 rpm, 1.94 hp @ 1750 rpm |
| Center Distance Code | 726 |
| Torque Out @ 1750 rpm | 1514 in lb |
| Family Name | F |
| Media Mapping Style | F |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Motor Application | General Purpose |
| Washdown Duty | No |
| Output Configuration | Left Output |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Style | Right Angle |
| Worm Position | Universal |
| Input Power Rating | 1.94 hp, 1.447 kW |
| Max. Input HP @ 100 rpm | 0.18 hp |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Fan Cooled | No |
| Output Shaft Projection | Solid Left Output |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520352 |
