Find a Service Center
Boston Gear
F7726-60-B5-J
700 Series 60:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835127
- 0.75 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input (Shaft or Bore) Size | 5/8 in |
| Style | Right Angle |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Fan Cooled | No |
| Use With | 726 |
| Motor HP | 3/4 hp |
| Output Torque @ RPM | 1385 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Output Speed | 29.2 rpm |
| Output Shaft | Solid |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Frame | 56C |
| Box Length | 7 3/8 in |
| Torque Out @ 1750 rpm | 1385 in lb |
| Motor Application | General Purpose |
| Motor Frame Size | B556C |
| Washdown Duty | No |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Torque Out @ 1150 rpm | 1390 in lb |
| Keyway Size | 3/16 x 3/32 |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Housing Material | Cast Iron |
| Box Height | 8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Ratio | 60:1 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Rated Efficiency | 72% |
| Output Torque | 1385 lb-in |
| Input HP @ RPM | 0.89 hp @ 1750 rpm, 0.64 hp @ 1150 rpm |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Center Distance | 2.625 in |
| Output Bore Shaft Dia. | 1.125 in |
| Bore Code | B5 |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Material | Cast Iron, Standard Paint |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Frame Size | 56C |
| Shaft Assembly Code | J |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Worm Position | Universal |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Series | 700 |
| Input Motor HP | 0.75 |
| Input Configuration | C-Face Quilled |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Reduction Type | Single |
| Standard | AGMA Service Class I |
| Output Configuration | Right Output |
| Max. Input HP @ 100 rpm | 0.1 hp |
| Media Mapping Style | F |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Output Shaft Projection | Solid Right Output |
| Lubrication | None |
| Bolt Pattern | 6.38 x 3.38 |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Box Width | 5.9 in |
| Input Power Rating | 0.89 hp, 0.664 kW |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Center Distance Code | 726 |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Media Mapping Output | J |
| Family Name | F |
| Weight | 41.1 LB |
| EAN or UPC | 781711520529 |
