Find a Service Center
Boston Gear
F7726-60-B5-J
700 Series 60:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835127
- 0.75 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque | 1385 lb-in |
| Rated Efficiency | 72% |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Style | Right Angle |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Output Shaft Projection | Solid Right Output |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Height | 8 in |
| Output Configuration | Right Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Motor Frame Size | B556C |
| Frame Size | 56C |
| Torque Out @ 1150 rpm | 1390 in lb |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Reduction Type | Single |
| Motor HP | 3/4 hp |
| Lubrication | None |
| Input Power Rating | 0.89 hp, 0.664 kW |
| Material | Cast Iron, Standard Paint |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Motor Application | General Purpose |
| Max. Input HP @ 100 rpm | 0.1 hp |
| Input Motor HP | 0.75 |
| Ratio | 60:1 |
| Output Bore Shaft Dia. | 1.125 in |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Bore Code | B5 |
| Family Name | F |
| Media Mapping Style | F |
| Input HP @ RPM | 0.89 hp @ 1750 rpm, 0.64 hp @ 1150 rpm |
| Fan Cooled | No |
| Use With | 726 |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Output Torque @ RPM | 1385 in lb @ 1750 rpm, 1390 in lb @ 1150 rpm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Center Distance Code | 726 |
| Input Configuration | C-Face Quilled |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Frame | 56C |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Keyway Size | 3/16 x 3/32 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Washdown Duty | No |
| Housing Material | Cast Iron |
| Standard | AGMA Service Class I |
| Shaft Assembly Code | J |
| Series | 700 |
| Bolt Pattern | 6.38 x 3.38 |
| Center Distance | 2.625 in |
| Base Mounting Attachment | No Base |
| Box Width | 5.9 in |
| Media Mapping Output | J |
| Torque Out @ 1750 rpm | 1385 in lb |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Output Speed | 29.2 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Worm Position | Universal |
| Box Length | 7 3/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520529 |
