Find a Service Center
- 12 Diametral Pitch
- 14.5⁰ Pressure Angle
- 48 Teeths
- Non-Metallic Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Diametral Pitch | 12 |
| Pressure Angle | 14 1/2 degrees |
| Torque at 1200 RPM | 89 lb/in |
| Outside Dia. [Min] | 4.17 in |
| Pitch Dia. | 4 in |
| Rated Torque [Max] | 81 @ 1800 rpm |
| Bore Dia. | 0.625 in |
| Material | Non-Metallic |
| Bore Size | 0.625 in |
| Hardened Teeth | Without Hardened Teeth |
| Length Through Bore | 0.750 in |
| Torque at 600 RPM | 110 lb/in |
| Face Width | 0.75 in |
| Torque at 900 RPM | 97 lb/in |
| Type | A |
| Bore Type | Minimum Plain Bore |
| Keyway | N/A |
| Hub Dia. | N/A |
| Set Screw Size | N/A |
| No. of Teeth | 48 |
| O.D. | 4.17 in |
| Torque at 1800 RPM | 81 lb/in |
| Origin | Reborable |
| Torque at 300 RPM | 138 lb/in |
| Outside Dia. | 4.17 in |
| Set Screw | N/A |
| Pitch Diameter | 4 in |
| Torque at 200 RPM | 161 lb/in |
| No. of Teeths | 48 |
| Weight | 0.451 LB |
| EAN or UPC | 781711090305 |
