Find a Service Center
Boston Gear
RF713-5-B5-H
700 Series 5:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101871258
- 1 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Do not exceed maximum primary pressure rating, as product could rupture and cause injury
- Do not connect regulator to bottled gas
| Box Height | 4 21/32 in |
| Torque Out @ 1150 rpm | 200 in lb |
| Output Shaft | Solid |
| Motor Application | General Purpose |
| Input HP @ RPM | 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Media Mapping Style | RF |
| Family Name | RF |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Center Distance Code | 713 |
| Shaft Assembly Code | H |
| Output Bore Shaft Dia. | 0.625 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Style | Right Angle |
| Torque Out @ 1750 rpm | 235 in lb |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 5/8 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Reduction Type | Single |
| Box Width | 4 1/32 in |
| Housing Material | Cast Iron |
| Keyway Size | 3/16 x 3/32 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Standard | AGMA Service Class II |
| Output Torque @ RPM | 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm |
| Use With | 713 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Frame | 56C |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Input Configuration | C-Face Coupled |
| Base Mounting Attachment | No Base |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Material | Cast Iron, Standard Paint |
| Motor HP | 1 hp |
| Series | 700 |
| Worm Position | Universal |
| Center Distance | 1.33 in |
| Output Torque | 235 lb-in |
| Input Motor HP | 1 |
| Output Speed | 350 rpm |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Input Power Rating | 1.39 hp, 1.037 kW |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Configuration | Left & Right Output |
| Ratio | 5:1 |
| Bolt Center | 3 1/4" x 2" |
| Box Length | 4 1/4 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Motor Frame Size | B556C |
| Rated Efficiency | 94% |
| Media Mapping Output | H |
| Frame Size | 56C |
| Fan Cooled | No |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bore Code | B5 |
| Weight | 18.1 LB |
| EAN or UPC | 781711526217 |
