Find a Service Center
Boston Gear
RF713-5-B5-H
700 Series 5:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101871258
- 1 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Do not exceed maximum primary pressure rating, as product could rupture and cause injury
- Do not connect regulator to bottled gas
| Series | 700 |
| Input Motor HP | 1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Shaft Assembly Code | H |
| Motor Frame Size | B556C |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Use With | 713 |
| Rated Efficiency | 94% |
| Output (Shaft or Bore) Size | 5/8 in |
| Bolt Center | 3 1/4" x 2" |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Torque Out @ 1150 rpm | 200 in lb |
| Ratio | 5:1 |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Shaft | Solid |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Width | 4 1/32 in |
| Fan Cooled | No |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Bore Code | B5 |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Torque | 235 lb-in |
| Media Mapping Style | RF |
| Box Height | 4 21/32 in |
| Torque Out @ 1750 rpm | 235 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Frame Size | 56C |
| Material | Cast Iron, Standard Paint |
| Input Power Rating | 1.39 hp, 1.037 kW |
| Input HP @ RPM | 0.84 hp @ 1150 rpm, 1.39 hp @ 1750 rpm |
| Standard | AGMA Service Class II |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Centerline of Output Shaft | 1 23/32 in |
| Worm Position | Universal |
| Reduction Type | Single |
| Center Distance | 1.33 in |
| Center Distance Code | 713 |
| Output Bore Shaft Dia. | 0.625 in |
| Box Length | 4 1/4 in |
| Output Speed | 350 rpm |
| Base Mounting Attachment | No Base |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Input Configuration | C-Face Coupled |
| Lubrication | None |
| Housing Material | Cast Iron |
| Family Name | RF |
| Motor HP | 1 hp |
| Keyway Size | 3/16 x 3/32 |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Style | Right Angle |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Output Configuration | Left & Right Output |
| Output Torque @ RPM | 200 in lb @ 1150 rpm, 235 in lb @ 1750 rpm |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Washdown Duty | No |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Media Mapping Output | H |
| Frame | 56C |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Weight | 18.1 LB |
| EAN or UPC | 781711526217 |
