Find a Service Center
Alternate Products
- Finished Steel Gear
- 20 Diametral Pitch
- 20.0° Pressure Angle
- 35 Teeth
- 1 3/4" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- More cost effective, quieter running and metallic options
| Set Screw | Yes |
| Hardened Teeth | Without Hardened Teeth |
| Keyway | w/Setscrew |
| Torque at 1800 RPM | 70.6 lb/in |
| Type | A |
| Length Through Bore | 1.000 in |
| Torque at 900 RPM | 99.4 lb/in |
| Torque at 300 RPM | 136 lb/in |
| Torque at 1200 RPM | 87.5 lb/in |
| Origin | Finished Bore |
| Diametral Pitch | 20 |
| No. of Teeth | 35 |
| Pressure Angle | 20 degrees |
| Bore Type | Bored to Size |
| Outside Dia. | 1.85 in |
| Hub Dia. | 1.47 in |
| Set Screw Size | 1/2 |
| Torque at 600 RPM | 115 lb/in |
| Material | Steel |
| Outside Dia. [Min] | 1.85 in |
| Pitch Diameter | 1.75 in |
| Bore Size | 0.500 in |
| Torque at 200 RPM | 145 lb/in |
| Weight | 0.551 LB |
| EAN or UPC | 781711461372 |
