Find a Service Center
Alternate Products
- Finished Steel Gear
- 12 Diametral Pitch
- 20.0° Pressure Angle
- 16 Teeth
- 1.333" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- More cost effective, quieter running and metallic options
| Bore Type | Bored to Size |
| Torque at 1800 RPM | 160 lb/in |
| Torque at 600 RPM | 243 lb/in |
| Torque at 300 RPM | 279 lb/in |
| Bore Size | 0.625 in |
| Type | A |
| Diametral Pitch | 12 |
| No. of Teeth | 16 |
| Length Through Bore | 1.625 in |
| Set Screw | Yes |
| Keyway | w/Setscrew |
| Torque at 900 RPM | 215 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Pressure Angle | 20 degrees |
| Hub Dia. | 1.06 in |
| Torque at 1200 RPM | 193 lb/in |
| Origin | Finished Bore |
| Outside Dia. | 1.5 in |
| Material | Steel |
| Outside Dia. [Min] | 1.5 in |
| Torque at 200 RPM | 294 lb/in |
| Set Screw Size | 5/8 |
| Pitch Diameter | 1.333 in |
| Weight | 0.351 LB |
| EAN or UPC | 781711461624 |
