Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 25 Teeth
- 2 1/2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Parallel shaft applications
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
- More cost effective, quieter running and metallic options
- Base oil viscosity: 500 SUS @ 100 °F
| Diametral Pitch | 10 |
| Material | Steel |
| Outside Dia. [Min] | 2.7 in |
| Keyway | w/Setscrew |
| Torque at 900 RPM | 535 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Dia. | 2.11 in |
| Set Screw | Yes |
| Set Screw Size | 7/8 |
| Bore Size | 0.875 in |
| Torque at 300 RPM | 799 lb/in |
| Origin | Finished Bore |
| Pressure Angle | 20 degrees |
| Torque at 1800 RPM | 358 lb/in |
| Bore Type | Bored to Size |
| Type | A |
| Torque at 600 RPM | 641 lb/in |
| Pitch Diameter | 2.5 in |
| Torque at 200 RPM | 870 lb/in |
| No. of Teeth | 25 |
| Outside Dia. | 2.7 in |
| Length Through Bore | 1.875 in |
| Torque at 1200 RPM | 459 lb/in |
| Weight | 2.001 LB |
| EAN or UPC | 781711461839 |
