Find a Service Center
Alternate Products
- Finished Steel Gear
- 10 Diametral Pitch
- 20.0° Pressure Angle
- 28 Teeth
- 2.800" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Parallel shaft applications
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
| Material | Steel |
| Outside Dia. | 3 in |
| Hub Dia. | 2.41 in |
| Keyway | w/Setscrew |
| Bore Size | 0.875 in |
| Torque at 1800 RPM | 385 lb/in |
| Torque at 900 RPM | 586 lb/in |
| Length Through Bore | 1.875 in |
| Origin | Finished Bore |
| Torque at 200 RPM | 990 lb/in |
| Diametral Pitch | 10 |
| Torque at 300 RPM | 901 lb/in |
| Type | A |
| Pressure Angle | 20 degrees |
| Outside Dia. [Min] | 3 in |
| Set Screw | Yes |
| Bore Type | Bored to Size |
| Hardened Teeth | Without Hardened Teeth |
| No. of Teeth | 28 |
| Set Screw Size | 7/8 |
| Torque at 1200 RPM | 499 lb/in |
| Torque at 600 RPM | 710 lb/in |
| Pitch Diameter | 2.8 in |
| Weight | 2.761 LB |
| EAN or UPC | 781711461853 |
