Find a Service Center
Alternate Products
- Finished Steel Gear
- 8 Diametral Pitch
- 20.0° Pressure Angle
- 16 Teeth
- 2" Pitch Diameter
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Base oil viscosity: 500 SUS @ 100 °F
- More cost effective, quieter running and metallic options
- Parallel shaft applications
- Four ball wear test 40 kg: 63 mm
- Reliability from steel, cast iron and brass
| Origin | Finished Bore |
| Bore Type | Bored to Size |
| Torque at 1200 RPM | 541 lb/in |
| Outside Dia. | 2.25 in |
| Set Screw | Yes |
| Bore Size | 1.000 in |
| Torque at 300 RPM | 877 lb/in |
| Torque at 600 RPM | 727 lb/in |
| Torque at 200 RPM | 943 lb/in |
| Keyway | w/Setscrew |
| Torque at 1800 RPM | 431 lb/in |
| Outside Dia. [Min] | 2.25 in |
| Set Screw Size | 1 |
| Hub Dia. | 1.55 in |
| Pitch Diameter | 2 in |
| No. of Teeth | 16 |
| Hardened Teeth | Without Hardened Teeth |
| Material | Steel |
| Diametral Pitch | 8 |
| Type | A |
| Torque at 900 RPM | 620 lb/in |
| Pressure Angle | 20 degrees |
| Length Through Bore | 2.375 in |
| Weight | 1.501 LB |
| EAN or UPC | 781711461921 |
