Find a Service Center
- 32 Diametral Pitch
- 20⁰ Pressure Angle
- 18 Teeths
- Molded Delrin Material
description
- Boston Gear spur gears are designed to transmit motion and power between parallel shafts. The different styles offered include spur, gear rack, pinion wire, stem pinions, and internal gears, and most come with a selection of bore diameters, keyways, and setscrews to accommodate a wide variety of application requirements. They are available in plastic, non-metallic, brass, steel, and cast iron and are manufactured in a variety of styles, including plain, web, web with lightening holes, and web with spokes. Many are available with or without hubs.Boston Gear manufactures both 14 1/2° and 20° PA, involute, full-depth system gears. While 20° PA is generally recognized as having a higher load-carrying capacity, 14 1/2° PA gears are used extensively because of lower backlash and smoother, quieter operation.
| Pitch Diameter | 0.5625 in |
| Set Screw | N/A |
| Face Width | 0.188 in |
| O.D. | 0.624 in |
| Torque at 1200 RPM | 3.4 lb/in |
| Pitch Dia. | 0.562 in |
| Diametral Pitch | 32 |
| No. of Teeth | 18 |
| Torque at 200 RPM | 4.3 lb/in |
| No. of Teeths | 18 |
| Torque at 600 RPM | 3.9 lb/in |
| Outside Dia. [Min] | 0.625 in |
| Bore Dia. | 0.156 in |
| Torque at 300 RPM | 4.1 lb/in |
| Hardened Teeth | Without Hardened Teeth |
| Torque at 900 RPM | 3.7 lb/in |
| Hub Dia. | 0.34 in |
| Origin | Reborable |
| Outside Dia. | 0.625 in |
| Torque at 1800 RPM | 3 lb/in |
| Length Through Bore | 0.498 in |
| Set Screw Size | N/A |
| Bore Size | 0.15625 in |
| Keyway | w/o Keyway, w/o Setscrew |
| Material | Molded Delrin |
| Type | A |
| Pressure Angle | 20 degrees |
| Bore Type | Minimum Plain Bore |
| Weight | 0.021 LB |
| EAN or UPC | 781711539866 |
