Find a Service Center
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- When you think "Special" Gears - Think Browning
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Pressure Angle | 14 1/2 degrees |
| Bore (Min) (in) | 1 |
| Length Through Bore | 1.625 in |
| No. of Teeth | 20 |
| Overall Length (in) | 1.625 |
| Hub Diameter (in) | 1.71875 |
| Length Through Bore (in) | 1.625 |
| Standards Met | AGMA |
| Hub Projection (in) | 0.625 |
| Diametral Pitch | 10 |
| Material | Steel |
| Bore Size (in) | 1 |
| Pitch Diameter (in) | 2 |
| Face Width (in) | 1 |
| Bore Type | Bored to Size |
| Pitch Diameter | 2 in |
| Bore Size | 1.000 in |
| Outside Diameter (in) | 2.2 |
| Number of Teeth/Threads | 20 |
| Bore (Max) (in) | 1 |
| Weight | 0.9 LB |
| EAN or UPC | 662289127498 |
