Find a Service Center
- Gray Iron Material
- Bushed Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- Browning Split Taper Bushed Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- When you think "Special" Gears - Think Browning
| Gear Construction | Spoked |
| Number of Teeth/Threads | 120 |
| Bore (Min) (in) | 0.75 |
| Overall Length (in) | 2.78125 |
| Pressure Angle | 20 degrees |
| Hub Diameter (in) | 4.125 |
| Pitch Diameter (in) | 15 |
| No. of Teeth | 120 |
| Bore Size (in) | 0.75 |
| Length Through Bore (in) | 2.5 |
| Outside Diameter (in) | 15.25 |
| Hub Projection (in) | 1 |
| Diametral Pitch | 8 |
| Length Through Bore | 2.375 in |
| Face Width (in) | 1.5 |
| Standards Met | AGMA |
| Bushing Bore Size (in) | 0.7500 to 2.6875 |
| Bore (Max) (in) | 2.6875 |
| Material | Gray Iron |
| Pitch Diameter | 15 in |
| Bore Type | Bushed Bore |
| Weight | 25.9 LB |
| EAN or UPC | 662289238071 |
