Find a Service Center
Alternate Products
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Outside Diameter (in) | 1.25 |
| Pressure Angle | 20 degrees |
| Hub Diameter (in) | 0.9375 |
| No. of Teeth | 18 |
| Overall Length (in) | 1.25 |
| Number of Teeth/Threads | 18 |
| Bore (Min) (in) | 0.5 |
| Standards Met | AGMA |
| Bore Size (in) | 0.5 |
| Bore Type | Bored to Size |
| Hub Projection (in) | 0.5 |
| Diametral Pitch | 16 |
| Bore (Max) (in) | 0.5 |
| Length Through Bore | 1.250 in |
| Material | Steel |
| Face Width (in) | 0.75 |
| Length Through Bore (in) | 1.25 |
| Pitch Diameter (in) | 1.125 |
| Bore Size | 0.500 in |
| Pitch Diameter | 1.125 in |
| Weight | 0.27 LB |
| EAN or UPC | 662289043033 |
