Find a Service Center
- Series E Radially Assembled Retaining Ring
- 0.188 in Shaft Size
- 0.025 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Thrust Groove Safety Factor of 2 Pg Lb | 90 lbf |
| Tape Rings Stack | 250 |
| Outside Dia. | 0.335 in |
| Length of Stack | 6.25 in |
| Package Type | Stacked |
| Load Capacity [Max] | 190 lbs |
| Type | Radially Assembled |
| Material | Carbon Steel |
| Shaft Dia. | 0.188 in |
| Tape Width | 1 in |
| Tape Length of Stack | 6.25 in |
| Thrust Ring Safety Factor of 3 Pr Lb | 193 lbf |
| Inch/Metric | Inch |
| Finish | Phosphate |
| RPM Limit | 30000 rpm |
| Clearance Installed in Groove | 0.35 in |
| Limiting Speed | 30000 rpm |
| Series | E |
| Groove Depth | 0.02 in |
| Thickness | 0.025 in |
| Plating | Phosphate |
| Edge Margin | 0.04 in |
| Weight | 0.001 LB |
| EAN or UPC | 721717025895 |
