Find a Service Center
- Series E Radially Assembled Retaining Ring
- 0.188 in Shaft Size
- 0.025 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Thrust Groove Safety Factor of 2 Pg Lb | 90 lbf |
| Tape Rings Stack | 250 |
| Tape Width | 1 in |
| Limiting Speed | 30000 rpm |
| Shaft Dia. | 0.188 in |
| Inch/Metric | Inch |
| Material | Carbon Steel |
| Edge Margin | 0.04 in |
| Plating | Phosphate |
| Thickness | 0.025 in |
| Clearance Installed in Groove | 0.35 in |
| Load Capacity [Max] | 190 lbs |
| Length of Stack | 6.25 in |
| Outside Dia. | 0.335 in |
| Tape Length of Stack | 6.25 in |
| Series | E |
| Type | Radially Assembled |
| Thrust Ring Safety Factor of 3 Pr Lb | 193 lbf |
| Finish | Phosphate |
| Groove Depth | 0.02 in |
| Package Type | Stacked |
| RPM Limit | 30000 rpm |
| Weight | 0.001 LB |
| EAN or UPC | 721717025895 |
