Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.625 in Shaft Size
- 0.042 in Thick
- Carbon Steel
- Zinc Dichromate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Tape Rings Stack | 250 |
| Inch/Metric | Inch |
| Material | Carbon Steel |
| Tape Length of Stack | 12.5 in |
| Load Capacity [Max] | 1420 lbs |
| Length of Stack | 12.5 in |
| Type | Radially Assembled |
| Limiting Speed | 12000 rpm |
| Thrust Ring Safety Factor of 3 Pr Lb | 1441 lbf |
| Plating | Zinc |
| Shaft Dia. | 0.625 in |
| Package Type | Loose |
| Clearance Installed in Groove | 0.96 in |
| Outside Dia. | 0.94 in |
| Tape Width | 2 in |
| Thickness | 0.042 in |
| Series | E |
| Edge Margin | 0.14 in |
| RPM Limit | 12000 rpm |
| Groove Depth | 0.07 in |
| Finish | Zinc Dichromate |
| Thrust Groove Safety Factor of 2 Pg Lb | 1050 lbf |
| Weight | 0.016 LB |
| EAN or UPC | 721717007396 |
