Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.625 in Shaft Size
- 0.042 in Thick
- Carbon Steel
- Zinc Dichromate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Type | Radially Assembled |
| Shaft Dia. | 0.625 in |
| Package Type | Stacked |
| Material | Carbon Steel |
| Limiting Speed | 12000 rpm |
| Inch/Metric | Inch |
| Groove Depth | 0.07 in |
| Outside Dia. | 0.94 in |
| RPM Limit | 12000 rpm |
| Length of Stack | 12.5 in |
| Finish | Zinc Dichromate |
| Series | E |
| Plating | Zinc |
| Clearance Installed in Groove | 0.96 in |
| Load Capacity [Max] | 1420 lbs |
| Thickness | 0.042 in |
| Weight | 0.032 LB |
| EAN or UPC | 721717027493 |
