Find a Service Center
- 1 in Shaft Diameter
- 1.851 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Inch |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Lip Type | Single Lip |
| Shaft Dia. | 1 in |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Cover/Compensation Ring/Plate Required | No |
| Seal Type | Oil |
| Housing Bore Dia. | 1.851 in |
| Overall Width | 0.25 in |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Width | 0.25 in |
| Surface Speed [Nom] | 1,179 ft/min |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | General Purpose |
| Solid | Yes |
| Family Name | Single Lip With Spring Shaft Seal |
| Lip Style | Internal |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Case Design | Metal Case |
| Weight | 0.082 LB |
| EAN or UPC | 85311008495 |
