Find a Service Center
- 1 in Shaft Diameter
- 2 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Construction | CRW1 |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 210 °F |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Seal Width | 0.25 in |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Pressure | 10 psi |
| Installation | Housing Press Fit |
| Overall Width | 0.25 in |
| Lip Material | Nitrile Rubber (NBR) |
| Housing Bore Dia. | 2 in |
| Shaft Dia. | 1 in |
| Seal Type | Oil |
| Family Name | Single Lip With Spring Shaft Seal |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Temperature Range [Max] | 225 °F |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Weight | 0.054 LB |
| EAN or UPC | 85311008570 |
