- 1.063 in Shaft Diameter
- 1.499 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Solid | Yes |
| Seal Type | Oil |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Overall Width | 0.25 in |
| Operating Temperature [Max] | 210 °F |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Seal Width | 0.25 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Speed | 0.07 ft/min |
| Inch/Metric | Inch |
| Installation | Housing Press Fit |
| Temperature Range [Min] | -65 °F |
| Construction | CRW1 |
| Shaft Dia. | 1.063 in |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 1.499 in |
| Lip Type | Single Lip |
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Case Construction | Steel Case w/o Inner Case |
| Weight | 0.027 LB |
| EAN or UPC | 85311008839 |

