Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.499 in Housing Bore
- 0.188 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Overall Width | 0.188 in |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Surface Speed [Nom] | 1,326 ft/min |
| Design | CRW1 |
| Temperature Range [Min] | -65 °F |
| Seal Application | General Purpose |
| Lubricant | Oil or Grease |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel Garter |
| Family Name | Single Lip With Spring Shaft Seal |
| Shaft Dia. | 1.125 in |
| Solid | Yes |
| Operating Temperature [Max] | 210 °F |
| Operating Temperature [Min] | -40 °F |
| Housing Bore Dia. | 1.499 in |
| Lip Style | Internal |
| Case Design | Metal Case |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/o Inner Case |
| Seal Width | 0.188 in |
| Temperature Range [Max] | 225 °F |
| Construction | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.048 LB |
| EAN or UPC | 85311009355 |
