Find a Service Center
Alternate Products
- 1.125 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Design | CRW1 |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Seal Width | 0.25 in |
| Solid | Yes |
| Housing Bore Dia. | 1.752 in |
| Pressure | 10 psi |
| Family Name | Single Lip With Spring Shaft Seal |
| Inch/Metric | Inch |
| Case Material | Steel |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 1.125 in |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Bore Sealant | Bore Tite |
| Spring Material | Carbon Steel |
| Spring Type | Garter |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Lip Style | Internal |
| Cover/Compensation Ring/Plate Required | No |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Construction | CRW1 |
| Overall Width | 0.25 in |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 210 °F |
| Weight | 0.035 LB |
| EAN or UPC | 85311009546 |
