Find a Service Center
- 1.125 in Shaft Diameter
- 1.874 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Inch/Metric | Inch |
| Lip Type | Single Lip |
| Overall Width | 0.25 in |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -40 °F |
| Design | CRW1 |
| Speed | 0.07 ft/min |
| Seal Type | Oil |
| Case Construction | Steel Case w/o Inner Case |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 1.874 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Design | Metal Case |
| Spring Material | Carbon Steel Garter |
| Operating Temperature [Max] | 210 °F |
| Lip Style | Internal |
| Solid | Yes |
| Seal Application | General Purpose |
| Seal Width | 0.25 in |
| Temperature Range [Max] | 212 °F |
| Shaft Dia. | 1.125 in |
| Seal Design | SKF Wave |
| Construction | CRW1 |
| Weight | 0.035 LB |
| EAN or UPC | 85311497848 |
