Find a Service Center
Alternate Products
- 1.188 in Shaft Diameter
- 2.125 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Shaft Dia. | 1.188 in |
| Seal Design | SKF Wave |
| Surface Speed [Nom] | 1,401 ft/min |
| Lip Style | Internal |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel |
| Case Design | Metal Case |
| Cover/Compensation Ring/Plate Required | No |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 210 °F |
| Speed | 0.07 ft/min |
| Overall Width | 0.313 in |
| Temperature Range [Min] | -65 °F |
| Inch/Metric | Inch |
| Case Construction | Steel Case w/o Inner Case |
| Seal Width | 0.313 in |
| Seal Type | Oil |
| Pressure | 10 psi |
| Construction | CRW1 |
| Seal Application | General Purpose |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Design | CRW1 |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Material | Steel |
| Bore Sealant | Bore Tite |
| Solid | Yes |
| Spring Type | Garter |
| Housing Bore Dia. | 2.125 in |
| Weight | 0.088 LB |
| EAN or UPC | 85311010733 |
| NSN Number | 5330-00-580-8529 |
