Find a Service Center
Alternate Products
- 1.25 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Seal Type | Oil |
| Housing Bore Dia. | 1.752 in |
| Speed | 0.07 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Temperature Range [Max] | 225 °F |
| Seal Width | 0.25 in |
| Seal Application | General Purpose |
| Overall Width | 0.25 in |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Inch |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Case Construction | Steel Case w/o Inner Case |
| Case Design | Metal Case |
| Lip Style | Internal |
| Construction | CRW1 |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Design | CRW1 |
| Spring Material | Carbon Steel Garter |
| Shaft Dia. | 1.25 in |
| Surface Speed [Nom] | 1,474 ft/min |
| Temperature Range [Min] | -65 °F |
| Weight | 0.031 LB |
| EAN or UPC | 85311011006 |
