Find a Service Center
Alternate Products
- 1.375 in Shaft Diameter
- 1.983 in Housing Bore
- 0.313 in Overall Width
- Polyacrylate Elastomer (ACM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Construction | Steel Case w/o Inner Case |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Width | 0.313 in |
| Lubricant | Oil or Grease |
| Overall Width | 0.313 in |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Operating Temperature [Max] | 302 °F |
| Temperature Range [Min] | -40 °F |
| Lip Material | Polyacrylate Elastomer (ACM) |
| Operating Temperature [Min] | -40 °F |
| Surface Speed [Nom] | 1,621 ft/min |
| Spring Material | Carbon Steel Garter |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Design | CRW1 |
| Speed | 0.07 ft/min |
| Construction | CRW1 |
| Lip Style | Internal |
| Case Design | Metal Case |
| Family Name | Single Lip With Spring Shaft Seal |
| Solid | Yes |
| Shaft Dia. | 1.375 in |
| Temperature Range [Max] | 300 °F |
| Housing Bore Dia. | 1.983 in |
| Weight | 0.04 LB |
| EAN or UPC | 85311012614 |
