Find a Service Center
Alternate Products
- 1.375 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Surface Speed [Nom] | 1,621 ft/min |
| Family Name | Single Lip With Spring Shaft Seal |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -65 °F |
| Seal Design | SKF Wave |
| Seal Application | General Purpose |
| Overall Width | 0.313 in |
| Construction | CRW1 |
| Lip Type | Single Lip |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -40 °F |
| Design | CRW1 |
| Housing Bore Dia. | 2.502 in |
| Solid | Yes |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Pressure | 10 psi |
| Shaft Dia. | 1.375 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Speed | 0.07 ft/min |
| Case Design | Metal Case |
| Case Construction | Steel Case w/o Inner Case |
| Seal Width | 0.313 in |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Weight | 0.093 LB |
| EAN or UPC | 85311013079 |
