Find a Service Center
Alternate Products
- 1.375 in Shaft Diameter
- 2.502 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 1,621 ft/min |
| Seal Application | General Purpose |
| Inch/Metric | Inch |
| Family Name | Single Lip With Spring Shaft Seal |
| Solid | Yes |
| Temperature Range [Max] | 225 °F |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Pressure | 10 psi |
| Seal Design | SKF Wave |
| Temperature Range [Min] | -65 °F |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.313 in |
| Spring Material | Carbon Steel Garter |
| Housing Bore Dia. | 2.502 in |
| Seal Width | 0.313 in |
| Design | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Construction | CRW1 |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Installation | Housing Press Fit |
| Shaft Dia. | 1.375 in |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Lip Type | Single Lip |
| Weight | 0.093 LB |
| EAN or UPC | 85311013079 |
