Find a Service Center
Alternate Products
- 1.438 in Shaft Diameter
- 2.623 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Inch/Metric | Inch |
| Spring Type | Garter |
| Operating Temperature [Min] | -40 °F |
| Solid | Yes |
| Shaft Dia. | 1.438 in |
| Bore Sealant | Bore Tite |
| Installation | Housing Press Fit |
| Lip Style | Internal |
| Temperature Range [Max] | 225 °F |
| Seal Type | Oil |
| Spring Material | Carbon Steel |
| Construction | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | General Purpose |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Case Construction | Steel Case w/o Inner Case |
| Case Design | Metal Case |
| Temperature Range [Min] | -65 °F |
| Overall Width | 0.313 in |
| Lip Material | Nitrile Rubber (NBR) |
| Family Name | Single Lip With Spring Shaft Seal |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Lip Type | Single Lip |
| Case Material | Steel |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Housing Bore Dia. | 2.623 in |
| Seal Width | 0.313 in |
| Speed | 0.07 ft/min |
| Weight | 0.095 LB |
| EAN or UPC | 85311014151 |
