Find a Service Center
- 1.5 in Shaft Diameter
- 2.374 in Housing Bore
- 0.313 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Operating Temperature [Max] | 210 °F |
| Housing Bore Dia. | 2.374 in |
| Surface Speed [Nom] | 1,768 ft/min |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Seal Width | 0.313 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Spring Material | Carbon Steel |
| Case Construction | Steel Case w/o Inner Case |
| Cover/Compensation Ring/Plate Required | No |
| Speed | 0.07 ft/min |
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Case Design | Metal Case |
| Operating Temperature [Min] | -40 °F |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Seal Type | Oil |
| Case Material | Steel |
| Shaft Dia. | 1.5 in |
| Design | CRW1 |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.313 in |
| Temperature Range [Max] | 225 °F |
| Bore Sealant | Bore Tite |
| Lip Style | Internal |
| Seal Application | General Purpose |
| Spring Type | Garter |
| Weight | 0.059 LB |
| EAN or UPC | 85311015141 |
