Find a Service Center
Alternate Products
- 1.625 in Shaft Diameter
- 2.125 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Seal Width | 0.25 in |
| Case Construction | Steel Case w/o Inner Case |
| Shaft Dia. | 1.625 in |
| Temperature Range [Min] | -65 °F |
| Speed | 0.07 ft/min |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Family Name | Single Lip With Spring Shaft Seal |
| Solid | Yes |
| Construction | CRW1 |
| Overall Width | 0.25 in |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 210 °F |
| Seal Design | SKF Wave |
| Lip Type | Single Lip |
| Seal Application | General Purpose |
| Cover/Compensation Ring/Plate Required | No |
| Case Design | Metal Case |
| Housing Bore Dia. | 2.125 in |
| Surface Speed [Nom] | 1,916 ft/min |
| Installation | Housing Press Fit |
| Pressure | 10 psi |
| Inch/Metric | Inch |
| Weight | 0.035 LB |
| EAN or UPC | 85311016612 |
