Find a Service Center
Alternate Products
- 4.625 in Shaft Diameter
- 5.751 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.5 in |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Surface Speed [Nom] | 3,600 ft/min |
| Speed | 0.07 ft/min |
| Seal Design | SKF Wave |
| Pressure | 10 psi |
| Operating Temperature [Max] | 210 °F |
| Seal Width | 0.5 in |
| Design | CRWH1 |
| Temperature Range [Max] | 225 °F |
| Case Design | Metal Case, Inner Case |
| Solid | Yes |
| Seal Application | General Purpose |
| Lubricant | Oil or Grease |
| Family Name | Single Lip With Spring Shaft Seal |
| Case Construction | Steel Case w/Inner Case |
| Shaft Dia. | 4.625 in |
| Spring Material | Carbon Steel Garter |
| Lip Style | Internal |
| Construction | CRWH1 |
| Housing Bore Dia. | 5.751 in |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.454 LB |
| EAN or UPC | 85311036313 |
| NSN Number | 5330-01-269-7441 |
