Find a Service Center
Alternate Products
- 0.5 in Shaft Diameter
- 1.124 in Housing Bore
- 0.256 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Family Name | Single Lip With Spring Shaft Seal |
| Spring Material | Carbon Steel Garter |
| Installation | Housing Press Fit |
| Case Design | Metal Case |
| Operating Temperature [Max] | 210 °F |
| Design | CRW1 |
| Shaft Dia. | 0.5 in |
| Inch/Metric | Inch |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Operating Temperature [Min] | -40 °F |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.256 in |
| Seal Width | 0.25 in |
| Surface Speed [Nom] | 590 ft/min |
| Speed | 0.07 ft/min |
| Seal Application | General Purpose |
| Construction | CRW1 |
| Housing Bore Dia. | 1.124 in |
| Temperature Range [Max] | 225 °F |
| Solid | Yes |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/o Inner Case |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Seal Type | Oil |
| Weight | 0.022 LB |
| EAN or UPC | 85311003537 |
