Find a Service Center
Alternate Products
- 5.75 in Shaft Diameter
- 7 in Housing Bore
- 0.5 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case, Inner Case |
| Seal Width | 0.5 in |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -40 °F |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Cover/Compensation Ring/Plate Required | No |
| Operating Temperature [Min] | -40 °F |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Design | CRWH1 |
| Inch/Metric | Inch |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Seal Type | Oil |
| Temperature Range [Max] | 225 °F |
| Overall Width | 0.5 in |
| Surface Speed [Nom] | 3,600 ft/min |
| Housing Bore Dia. | 7 in |
| Seal Design | SKF Wave |
| Solid | Yes |
| Spring Material | Carbon Steel Garter |
| Construction | CRWH1 |
| Shaft Dia. | 5.75 in |
| Case Construction | Steel Case w/Inner Case |
| Lip Type | Single Lip |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.596 LB |
| EAN or UPC | 85311038515 |
| NSN Number | 5330-00-154-8487 |
