Find a Service Center
Alternate Products
- 0.813 in Shaft Diameter
- 1.499 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Pressure | 10 psi |
| Solid | Yes |
| Lip Style | Internal |
| Lubricant | Oil or Grease |
| Case Design | Metal Case |
| Spring Type | Garter |
| Construction | CRW1 |
| Seal Width | 0.25 in |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 225 °F |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 1.499 in |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Spring Material | Carbon Steel |
| Operating Temperature [Min] | -40 °F |
| Temperature Range [Min] | -65 °F |
| Design | CRW1 |
| Case Material | Steel |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Overall Width | 0.25 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Shaft Dia. | 0.813 in |
| Installation | Housing Press Fit |
| Family Name | Single Lip With Spring Shaft Seal |
| Weight | 0.073 LB |
| EAN or UPC | 85311006378 |
| NSN Number | 5330-01-181-0728 |
