Find a Service Center
- 1 in Shaft Diameter
- 1.752 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Material | Nitrile Rubber (NBR) |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Inch |
| Speed | 0.07 ft/min |
| Installation | Housing Press Fit |
| Overall Width | 0.25 in |
| Operating Temperature [Min] | -40 °F |
| Case Design | Metal Case |
| Shaft Dia. | 1 in |
| Operating Temperature [Max] | 210 °F |
| Lip Style | Internal |
| Seal Type | Oil |
| Seal Width | 0.25 in |
| Family Name | Single Lip With Spring Shaft Seal |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -65 °F |
| Lip Type | Single Lip |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 1.752 in |
| Construction | CRW1 |
| Design | CRW1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Solid | Yes |
| Seal Design | SKF Wave |
| Lubricant | Oil or Grease |
| Case Construction | Steel Case w/o Inner Case |
| Surface Speed [Nom] | 1,179 ft/min |
| Seal Application | General Purpose |
| Weight | 0.076 LB |
| EAN or UPC | 85311008402 |
