MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Row Type
1
Precision
Standard
Cage Type
Metal
Cage Material
Bearing Steel
Width
0.63 in, 16 mm
Capacity
Standard Capacity
Element Material
Bearing Steel
No. of Rows
Single
Ring Type
Solid Inner Ring and Solid Outer Ring
Duplex Type
Single
Snap Ring
No Snap Ring
Origin
Single Row Angular Contact
Limiting Speed - Grease
10000 rpm
Seal Material
None
Enclosure
Open
Seal Type
Unsealed
icNumber
7695838
Series
7200PJ
Locking Device
No Locking Device
Inch/Metric
Metric
Static Load Rating
15.6 kN
O.D. Type
Cylindrical
Internal Design
Universal Mounting
O.D.
2.44 in, 62 mm
Precision Level
Standard (ABEC 1)
Flush Ground
Yes
Fillet Radius
1 mm
Radial Internal Clearance Specification
Normal Clearance
Rolling Element
Ball
No. of Bearings
1
Static Load Rating [Max]
2650 lbf
Rows of Balls
Single
Bearing Type
Unmounted, Angular Contact
Limiting Speed - Oil
13000 rpm
No. in Set
Single Bearing
I.D.
1.18 in, 30 mm
Temperature Range [Max]
450 °F
Ball Material
Steel
Cage
Sheet Metal
Material
Bearing Steel
Precision Rating
ABEC 3
Preload Level
Light
Radial Internal Clearance
Normal
Inner Ring Width
0.63 in, 16 mm
Dynamic Load Rating
23.8 kN
Bore Type
Cylindrical
Bearing Class
Class 6 / P6
Contact Angle
40 Degree
Outer Ring Width
0.63 in, 16 mm
Lubricant
Oil Preservative
Weight
0.477 LB
EAN or UPC
97741016407
We're here for you
with Service Centers across the country - We have your back