MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
7200-PJ and PJD Series bearings are used for heavy one-directional thrust loads or combined radial and thrust loads where thrust is predominant.
Locking Device
No Locking Device
Limiting Speed - Oil
13000 rpm
Contact Angle
40 Degree
Bearing Type
Unmounted, Angular Contact
Lubricant
Oil Preservative
Temperature Range [Max]
450 °F
No. of Bearings
1
Cage Type
Metal
Precision Rating
ABEC 3
Static Load Rating [Max]
2650 lbf
Rolling Element
Ball
Dynamic Load Rating
23.8 kN
Cage
Sheet Metal
Rows of Balls
Single
icNumber
7695838
Bore Type
Cylindrical
Width
0.63 in, 16 mm
Origin
Single Row Angular Contact
Seal Type
Unsealed
Bearing Class
Class 6 / P6
No. in Set
Single Bearing
Radial Internal Clearance
Normal
Row Type
1
Inner Ring Width
0.63 in, 16 mm
Fillet Radius
1 mm
Precision
Standard
Limiting Speed - Grease
10000 rpm
I.D.
1.18 in, 30 mm
Internal Design
Universal Mounting
Series
7200PJ
Snap Ring
No Snap Ring
Element Material
Bearing Steel
Precision Level
Standard (ABEC 1)
Radial Internal Clearance Specification
Normal Clearance
Material
Bearing Steel
Outer Ring Width
0.63 in, 16 mm
Ball Material
Steel
No. of Rows
Single
Seal Material
None
Capacity
Standard Capacity
Inch/Metric
Metric
Ring Type
Solid Inner Ring and Solid Outer Ring
Cage Material
Bearing Steel
O.D.
2.44 in, 62 mm
Enclosure
Open
Preload Level
Light
Duplex Type
Single
Flush Ground
Yes
O.D. Type
Cylindrical
Static Load Rating
15.6 kN
Weight
0.477 LB
EAN or UPC
97741016407
We're here for you
with Service Centers across the country - We have your back